Call us to get tree helping such as tree clear, tree clean, bush trimmers, shrub removal, stump clean and lots of other across United States


Click to call

Call +1 (855) 280-15-30










Remove the plant with its entire root system or new.

The best way to Dig Bushes With Roots Up. Scroll down to see more content. Great care needs to be taken when digging it up once a shrub or bush is in its form and created. Deep root systems which may be hard to reduce and seek out out are developed by some bushes.

These root systems that are huge are usually too big to reduce entirely from the. Hand removal of plants is possible for light infestations and where native species co-occur with it. This is recommended for plants with stems under 2 inches in diameter. If a plant is particularly hard to pull out, digging around the edges with a shovel helps loosen the plant. This process is.

In the meantime, they might get in your way as you try to replace the bush or plant something else in the same spot, and some roots might send up suckers in an attempt to keep the bush alive.

Dig a trench approximately 2-feet deep around and under the root ball of the bush. The trench allows you to get under the bush more easily. Lay a large beam, such as a piece of four-by-six lumber, on the ground over an exposed area of root, and connect the beam to the root with a chain.

Put a car jack under the beam and start lifting. Jun 21, Use leverage. Start by digging around the base of the shrub and cutting all the roots you can get at. Then lay scraps of plywood on each side of the shrub. Set a jack stand or concrete blocks on one side and set up your jack on the other. Lay a beam across them and tie Estimated Reading Time: 1 min.